HICTOP CR-10 3D Printer
Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm
High Accuracy, Big Printing Volume, Stable
Are you still looking for a big assembled 3D printer? Then this is the one that you deserve to have. It comes in three parts, it just needs a few steps to build up. This machine(3DP-20) has big printing capacity. You can print a big model with an i3 printer. NO soldering, NO measuring. It is easy to do the calibration. Every printer must have a more than 10 hours test printing before shipping. We will make sure all printers are in good condition. REMOTE FEEDING mode makes the extruder lighter, faster and stable.
It comes in three parts. It only takes a few steps to build it up, it is very easy and you just need about 10 minutes to build. All wires are attached to labels, Don’t worry about wrong wiring. All you have to do is hook everything up.
Printing Size： 300*300*400mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 250 degree
Extruder temperature: PLA: 210
Hotbed temperature: PLA: 50
Printing Speed：Normal: 80mm/s, Max.: 200mm/s
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm
This 3DP-20 can print big models, the max printing size is 300x300x400mm/11x11x15 inches.
It also could be upgraded to 500x500x500cm if you need.
Continuous working time last more than 50 hours.
Extruder quantity: 1
Body Structure: Imported V-Slot Aluminum Bearings
Nozzle Diameter：Standard 0.4mm
Printing Method: SD card(offline), contact to the PC(online)
LCD screen: 3 inch LCD screen with aircraft knob
Power supply: Input: 110-240V Output: 12V/30a
Hotbed: 4mm aluminum alloy platform, 3mm special tempered glass
Operating Software：CURA、Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format: STL, G-Code
Operating System: Linux, Windows, OSX
High accuracy bearings and quality parts, it makes the printer much more stable and quiet when printing.
Product Size: 490*600*615mm
Package Size: 540*640*310 mm
Net Weight: 10.3kg
Gross Weight: 14kg
The hotbed is aluminum PCD board. There is also a glass board attached, No worry about a bent heated bed. Flat bed platform with big printing size
*HICTOP 3D printer DIY kits (including build plate and tempered glass)
*Spare screws and Wrench kits
*Assembly instructions and user manual.
*SD card*1(the user manual is on SD card)
*0.2kg PLA Filament
All in one design, the control board, LCD and power supply are designed together. It is safe, easy and good-looking.
- EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well.
- PRINTING SIZE: Prints max size of 300X300X400mm. No longer will you be limited to small models.
- LONG SERVICE LIFE: Imported Linear navigation with low friction. Industrial-grade PCB can continuously print for 200 hours without pressure
- HEATING BED: Industrial grade aluminum alloy platform&special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy to take out the model.
- EASY WIRING: Wires are already connected to the control board & cables are also attached, easy for wiring.